- 01582 75 33 29
- info@alltimeremovals.com
- Mon - Fri: 9:00 - 18:00, Sat: 9:00 - 17:00
Removals Corby
Removals Corby with Alltime Removals means a survey-led move planned around your actual address, whether that is a newer build on Priors Hall, a terrace off Corporation Street, or a property with A43 or A14 access at either end. Trading since 2002, MoveAssured approved, AIM member, and rated 4.8 stars on Reallymoving, our advisers visit before we quote, walk every room, and build a package around what your specific move actually needs.
What Should You Expect from Removals Corby When Moving Across Corby’s Estates?
The starting point is a free adviser visit. We walk your property, note access points, stairwells, and any items that need dismantling before the move day, then plan the job to fit a typical 8 to 10 hour window. Corby’s estate layouts vary considerably. Newer roads on Priors Hall and Oakley Vale have wider carriageways, while older streets in Kingswood, Lodge Park, and around the town centre can be much tighter. We confirm vehicle size, parking arrangements, and loading access before the crew arrives.
On move day, furniture goes out padded and protected with our Defenda Guard covers, boxes are loaded room-by-room to a labelled plan, and the same crew unpacks at your new property so nothing is guessed at the far end. If you want beds made up and the kitchen accessible before we leave, say so. Nothing is a problem for us.
For customers who need storage between properties, our secure storage at the Houghton Regis depot is open 24 hours a day, seven days a week, with individually alarmed units available by the cubic foot on short or long-term rental. The A43 runs directly between Corby and our depot, so your belongings are accessible whenever you need them.
We handle house removals Corby, flat removals, and office removals on the same survey-led basis. Businesses moving filing cabinets, IT equipment, and office furniture across Corby or further afield get the same advance planning and crew-matched vehicle as a family relocation.
How Do You Handle Tight Parking and Narrow Access on Corby Terraces and Cul-de-Sacs?
Corby has a mix of property types and road layouts that need different approaches.
Older terraced streets near the town centre and Corporation Street have on-street parking, narrow carriageways, and limited turning space. We size the vehicle carefully from the inventory. A medium-wheelbase van sometimes works better than a full 7.5-tonne lorry for a single-address pick-up.
Cul-de-sacs on Lodge Park, Kingswood and Shire Road estates have turning circles that can restrict where a large van can manoeuvre. We note this at the survey and flag the approach route to the crew in advance.
Priors Hall and Oakley Vale newer builds generally have good road widths, but shared drives, adopted roads still under construction, and allocated parking bays can limit where a van can stop. We confirm this at the survey visit. Priors Hall removals jobs on phases still completing sometimes require a crew transfer point while construction traffic has priority.
Properties with alley or rear-access only require a carry from a rear entry point. We note the distance and surface at the survey so the crew knows what to expect.
Rural edge addresses near Great Oakley, Stanion Lane and Little Stanion can have lane surfaces, low bridges, and tight bends that rule out larger vehicles. Our adviser confirms access before recommending a vehicle type.
For any Corby address where access looks complicated, let us know when you first make contact. We plan around it, not on the morning.
What’s the Best Plan for Moving to or From Priors Hall, Oakley Vale and Great Oakley?
These three areas each have practical differences worth knowing before your move date.
Priors Hall is Corby’s largest recent development and sits north-east of the town centre off the A6116. Road widths are good for a large van, but phases of the estate are still being completed and road adoptions can change. We ask about your specific phase and plot at the survey to confirm the most direct loading route. Priors Hall removals jobs that involve a new-build completion often need a contingency plan in case the developer pushes the handover by 24 to 48 hours.
Oakley Vale sits south-east of the centre with a mix of detached houses and smaller terraces. The internal road layout loops back in places, so we route the van approach from the survey notes rather than a sat-nav route. Our packing services are often added on Oakley Vale removals jobs where families are balancing school handovers and key collection on the same day. We can cover fragile items only or a full pack-and-unpack with material disposal.
Great Oakley is a smaller village south of the main Corby urban area, with narrow approach lanes from the B670. For Great Oakley house moves we confirm vehicle dimensions against the lane widths at the survey. A 3.5-tonne Luton almost always clears them. A 7.5-tonne lorry sometimes does not, in which case we plan a split-load or a crew transfer at the lane entrance.
Weldon, Little Stanion, Cottingham and Rockingham are all covered on the same basis. Village moves to or from Corby estates are a regular part of our work across NN17 and NN18.
How Do Corby’s A43 and A14 Routes Affect Move Times?
Corby sits at a useful point in the East Midlands road network. The A43 and A14 both carry heavy goods traffic and can back up at certain times, so we plan departure times around the route rather than leaving it to the crew on the morning.
Destination
Route
Off-peak drive time
Kettering
A6003 south direct
15 to 20 minutes
Northampton
A43 south
30 to 40 minutes
Market Harborough
A427 west
20 to 25 minutes
Peterborough
A43 to A14 east
40 to 50 minutes
Milton Keynes
A43 south to M1 J15A
50 to 60 minutes
Houghton Regis depot
A43 to A5 south
60 to 70 minutes
London
A43 to M1 south
90 to 110 minutes
For moves from Corby to Kettering or Market Harborough, the A43 and A427 are consistent outside the morning peak (7.30am to 9am). A 7am departure from Corby puts the lorry into Kettering town centre before traffic builds.
For longer-distance moves, we build the full route timing into the day plan at the survey stage. You get a fixed price, not an hourly meter.
Can You Coordinate Moves Around Corby Station, Town-Centre Restrictions and School-Run Traffic?
Yes, and it is one of the things the survey visit is specifically designed to sort.
Corby railway station sits on the Midland Main Line extension and gives direct services to London St Pancras in around 65 minutes. The Rockingham Road approach to the station creates a pinch point for vans during commuter drop-off (7.30am to 9am) and afternoon pick-up (5pm to 6pm). For properties on or near the station approach, we schedule loading to avoid those windows.
Willow Place Shopping Centre and the bus station area generate retail parking traffic and loading restrictions during business hours. For town-centre properties near the centre, a 7am start gets the load on before retail and delivery traffic fills the roads around NN17.
School-run congestion around Corby Technical School, Lodge Park Academy and the primary schools in Kingswood and Oakley Vale runs from 8.15am to 9am and again from 2.45pm to 3.30pm. Our advisers build these windows into the route and start-time plan. A 7am departure from a school-adjacent street keeps the crew clear of both.
Rockingham Leisure Park and the Rockingham Motor Speedway area can also create event-day traffic on the A6003 and local B-roads when motorsport events run. If your move date falls near a scheduled event, we flag it at the survey and adjust the route or start time accordingly. Removals near Rockingham Leisure Park are best planned with an early start on event days regardless of direction.
For same-day moves between Corby and a neighbouring town, tell us your timing constraints at the survey and we build them in.
What our Harpenden customers say about us
Areas We Cover Near Corby
Our Corby team covers NN17, NN18 and the surrounding North Northamptonshire corridor. Regular move routes include Corby to Kettering, Corby to Market Harborough via the A427, Corby to Northampton via the A43, and the village-to-town moves between Weldon, Little Stanion, Cottingham and the main Corby estates. For longer relocations from Corby to Bedfordshire and beyond, our national service covers the full move from our Houghton Regis depot.
How a Corby Removal with Alltime Removals Works
Book a free survey. Call or fill in the quote form and an adviser arranges a visit at your property.
Inventory and access check. The adviser walks every room, notes access conditions, flags items needing dismantling, and confirms vehicle and crew size.
Written quote. You receive a fixed, itemised price before you commit. No open-ended estimates.
Move day. The crew arrives with a van matched to your inventory. Furniture goes out under Defenda Guard covers, boxes are loaded room-by-room to a labelled plan.
Handover at the new property. The same crew unloads and places items at the other end. Beds are reassembled first where possible so the family can settle from the first night.
Removals Corby FAQ’s
Get a Quote
Planning a move in or out of Corby? Get a removals quote for Corby and our adviser will arrange a survey at your property. We confirm access at both addresses, check parking options and give you a written fixed price before anything is booked.